Today, nobody should produce waste for the simple ecological, economic and moral factors. The Foundries, Metallurgical & industrial enterprises and craftsman’s establishments are asked to take the waste back into the energy circuit as often as possible. Waste materials can become valuable secondary raw materials once they are briquetted & can be re-used by smelting. The wood shavings are compressed to be used as burning fuel; Metal chips / Turnings are reduced and converted to metal again with high recovery; Toxic materials can be reduced in volume and converted to vitrified slag which can be dumped or for reuse in road construction etc.

Our briquetting machines can produce briquettes which have been compressed at a ratio of up to 1:25. These waste briquettes can be smelted with almost no losses. The machines can also press out any oils or emulsions which may be adhering to chips. The compression of wood shavings to the extent of 5000 kg/sq cm ensures that almost every possible waste gets briquetted without molasses or any other adhesive. Such considerable reductions in the volume of wastes lead to significant savings in the haulage and storage costs and minimise the losses incurred during smelting. Due to the great value of the reclaimed material, many companies see a pay back on their capital investment in 3 to 12 months.


During the burning of wood chips, heavy losses arise due to oxidation. Nut Cracker’ briquetting machines guarantee briquettes of high density. Our machines work as continuous systems thereby maintaining higher production rates. The machines are able to briquette the shavings / chips of metals, fodder, husk, wood etc and enables them to be reused as high-grade secondary raw materials. The compression force up to 5000 kg / sq cm guarantees an adequate reduction in the amount of scrap and the removal of the lubricants.

* For Technical specifications please request a quote or directly contact our sales team.


1. The chips are fed via hopper with screw conveyor
2. The automatic control system ensures uniform briquette length
3. Relatively higher service life, safety and trouble-free performance
4. Higher densities with compaction to the ratios of 1:25 are achievable
5. The graphic display not only shows all the operating and processing data, but also assists with the troubleshooting thereby reducing the machine operation downtime to the minimum