Top Metal Recycling Equipment Manufacturer in India

Top Metal Recycling Equipment Manufacturer in India

Scrap metal recycling equipment by Nut Cracker offers a complete solution for managing, processing, and converting scrap metal into valuable, reusable material. As a top metal recycling equipment manufacturer in India, we provide robust machines like balers, shredders, and shearing units, engineered for heavy-duty industrial use. Designed to handle various types of scrap, our metal recycling machines help industries minimize volume, reduce transportation costs, and increase material recovery. Choose Nut Cracker for innovative, efficient, and sustainable scrap handling solutions.

Our Scrap Metal Recycling Equipment Range

Anyone who runs a scrap yard or melting unit knows that scrap never comes in one shape or size. A machine that handles light sheet scrap well can struggle with heavy castings or bulky car bodies. Over the years, we’ve seen this problem on the ground, and that’s why Nut Cracker offers a full line of scrap metal recycling equipment. You get the right metal recycling machine for each stage, from cutting and shredding to baling and compacting.

Metal Scrap Baling Press Machines 

Our baling press machine range compresses loose scrap into dense, uniform bales that are easier to store, transport and feed into furnaces. Smaller units can start with a double action baler machine. High-volume yards handling car bodies and heavy scrap use our triple action baler machine or continuous baler machine For maximum output, the double chamber baler (JUDWA) produces two bales at the same time.

Metal Shredders 

As a shredder machine manufacturer, we offer shredding systems that reduce bulky scrap into small, dense pieces. Our hammer mill shredder machine produces clean, furnace-ready shredded scrap. Our Double shaft shredder works as a pre-shredder that reduces the load on the main shredder.

Shearing Machines

Nut Cracker is a shearing machine manufacturer offering four shear types for cutting heavy and oversized scrap:

Briquetting Machines / Chip Compactors

Turnings, chips and borings are small, loose and hard to handle. They take up a lot of space and some of the metal gets lost when they go into the furnace. Our briquetting machine presses this loose scrap into solid blocks called briquettes. These are easy to store, easy to move, and give you more metal after melting.

Casting Crackers

Casting crackers break large castings and heavy cast scrap into smaller pieces that are easier to charge into a furnace.

Cranes & Grabs

In a busy scrap yard, a lot of time goes into just moving material from one place to another. Doing it by hand is slow, and with heavy scrap it can be risky too. Our cranes and grabs take care of that. They lift scrap from the heap and drop it straight into the shredder, baler or shear, so your machines don’t sit idle waiting for the next load.

How a Scrap Metal Recycling Plant Works

Scrap doesn’t go straight from the yard to the furnace. In most scrap metal recycling plants, it passes through four simple steps, and each step needs its own machine.

  1. Collection and sorting: First, the scrap is collected and sorted. Iron and steel go one way, while aluminium, copper and brass go the other. Cranes and grabs help move the heavy loads around.
  2. Cutting and shredding: Long pieces like beams and rebars are too big to handle as they are, so shears cut them down to size. Bulky scrap goes into a shredder, which breaks it into small, clean pieces.
  3. Baling and briquetting: Light and loose scrap takes up a lot of space. A baler presses it into tight bales. Chips and turnings go into a briquetting machine, which turns them into solid blocks.
  4. Melting: Finally, the processed scrap is sent to induction furnaces and steel plants. Because it’s now dense and compact, more metal fits into the furnace and less of it is lost while melting.

Which Metal Recycling Machine Do You Need?

Use this guide to match your scrap type with the right metal recycling machine:

Scrap Type

Recommended Machine

Loose sheet cuttings and light scrap

Single/Double Action Baler 

Car bodies, HMS and heavy scrap (high volume)

Triple Action Baler / Continuous Baler

Mixed scrap needing furnace-ready output

Hammer Mill Shredder

Bulky scrap before the main shredder

Twin Shaft Pre-Shredder

Beams, rebars and long structural scrap

Box Shear/ Container Shear

Turnings, chips and borings

Briquetting Machine 

Heavy castings

Casting Cracker

Not sure which machine fits your scrap? Share your scrap type and daily volume with our team for a recommendation.

Industries We Serve

If your business deals with metal scrap in any form, there’s a good chance our scrap recycling machine range can make your work easier. Here’s where our machines are working today:

Why Choose Nut Cracker as Your Metal Recycling Equipment Manufacturer in India

With built-for-India scrap metal recycling equipment and local service support, Nut Cracker helps you keep your plant running with minimum downtime.

Metal Recycling Machine Price: What Affects the Cost

The metal recycling machine price depends on your exact requirement. The main factors are:

Contact us with your scrap details to get an accurate quote.

Frequently Asked Questions

Q1. What is scrap metal recycling equipment used for?


Scrap metal recycling equipment is used to make scrap smaller, denser and easier to handle. It cuts, shreds, bales or compacts the scrap so it takes up less space and costs less to transport. It also gets the scrap ready for melting in furnaces and steel plants.

Q2. Which metal recycling machine is best for HMS and LMS scrap?


For HMS and LMS scrap, a box shear or a triple action baler is usually the best metal recycling machine. A box shear cuts heavy scrap down to the right size. A triple action baler presses it into tight, high-density bales that are easy to move and melt.

Q3. What is the difference between a baler and a briquetting machine?


The main difference is the type of scrap they handle. A baler is meant for bigger, loose scrap like sheets and light metal, and turns it into large bales. A briquetting machine is meant for fine scrap like chips, turnings and borings, and turns it into small, solid blocks.

Q4. Can one recycling setup handle both ferrous and non-ferrous scrap?


Yes, it can. Our balers, shredders and shears work with both ferrous and non-ferrous scrap, including steel, aluminium, copper and brass. So if your yard gets mixed scrap, you don’t need separate setups for each type.

Q5. What equipment is needed to set up a scrap metal recycling plant?


Most scrap metal recycling plants need four types of machines:

Which machines you need, and in what size, depends on your scrap type and how much you handle every day.

Q6. Do you provide installation and after-sales support across India?


Yes. Our team handles installation and commissioning at your site anywhere in India. After that, we stay with you for service and support, and AMC plans are available if you want regular maintenance.

Looking for reliable scrap metal recycling equipment for your plant? Talk to our team for the right machine and a custom quote.

Enquire Now WhatsApp WhatsApp Call Now